Film Simulation vs Preset: Why Shooting Through Wins
A film simulation is applied while the shutter is open. A preset is applied after the photo already exists. That sounds pedantic, but it decides three things you can see: how the grain behaves, how a blown highlight falls off, and what happens to a face in shadow. Here is what each one does, where presets are the better tool, and why shooting through a stock beats pushing sliders at a finished frame.
Nine real film stocks, shot through live on iPhone. Free to download.
What a film simulation actually is
Two film simulations, one frame, two different answers. A preset pack ships one of these looks as a file you apply afterwards; these are nine kernels that run while the shutter is open.
A film simulation is a recipe for how a camera should render light. It is evaluated live, frame by frame, at the moment of capture, before anything is stored. The camera is not adding a look to a photograph it has already taken — it is answering a different question while it is still making the picture: given this light, this subject, this exposure, what should the output look like?
Fujifilm introduced the term with the X series in 2012, and the naming convention has been copied ever since because it works. The simulations are called after the real stocks they imitate: Astia, Velvia, Classic Chrome, Classic Negative, Eterna, Reala Ace, Nostalgic Neg, Provia. "I shot this on Velvia" means the scene was rendered through a simulation named after Fuji's punchy slide film.
That is why a simulation behaves the way real film does. Grain is densest in the midtones and thins in clean shadows because the emulsion had less to develop there. Highlights fall off gradually because the emulsion had latitude. Skin in shadow keeps its colour because the dye layers responded to the scene as a whole. None of that is a filter slapped on top — it is a render.
Grainhaus works the same way, minus the camera. Each of the nine stocks in the iOS app is a real Core Image kernel — a CIKL program compiled at runtime, not a stack of sliders. The film simulation app runs the kernel on the live frame before the print ejects, so grade, grain and rolloff are decided in one pass.
What a preset actually is
A preset is a file of settings. An XMP sidecar, a DNG camera profile, a LUT cube — under the skin it is a list of adjustments: lift the blacks by this much, push saturation by this much, warm the highlights by this much, add this much grain. The photo has already been captured. The preset re-interprets it, and can only re-interpret what is already there.
This is the crucial limitation, and it is not a flaw in the preset. A preset cannot change a highlight already clipped to pure white, or put detail back into a crushed shadow. It cannot know that the person in the frame was under a tree and the sky behind them was far brighter, because that was never recorded — the file contains pixel values and a tone curve, not a description of the scene.
A good preset is a useful tool. If your workflow is shoot-raw-then-grade-in-Lightroom, it is exactly the right shape for the job. The difference is the moment it operates, not its quality.
The difference you can actually see
Grain
A simulation's grain is part of the exposure, modulated by the light in the frame, so shadows stay clean and midtones carry the texture. A preset's grain is a texture laid over the whole image at the same strength, which is why it so often reads as a noise filter rather than as film — the same density in a snow scene or a dim interior.
Grainhaus's Bleu 800 is the clearest example: a single-tap Large grain that behaves like grain rather than like an overlay. Pastel is the opposite case — the only stock with no grain at all, which works because the kernel leaves it out rather than because a slider was turned down.
Highlight rolloff
A simulation decides how a blown highlight falls off in the moment the light hits it, because it evaluates the scene and the exposure together. A preset can only clip what is already clipped. If the sky in your raw file is a flat field of pure white, no rolloff applied afterwards will put a gradient back into it — the information was thrown away at capture, and a preset works on the file, not the moment.
Skin
Skin is where the difference shows up most, because a face has to look correct in every frame. A simulation can hold a specific relationship between exposure and skin tone, since it evaluates both at once — which is exactly what a portrait stock like Portra does. A preset applies the same relationship to every frame, whether the face was in open shade or direct sun, so a preset that looks right on one shot drifts on the next.
The film stock photography guide walks through how the nine stocks differ on one frame.
The Kodak Portra 400 case
Portra is the clearest example in the wild, because the thing it is known for is keeping skin believable. It is a soft, low-contrast negative with fine grain and a lifted-black curve, and its reputation rests on the face looking like a face rather than a colour swatch.
A preset that pushes orange into the shadows and teal into the highlights is fighting the stock's actual behaviour. That is the look of a modern blockbuster grade — legitimate, but not Portra, which desaturates while keeping skin believable rather than pumping orange into it. The Kodak Portra 400 filter page covers the real signature.
Grainhaus's Portra is a port of the Fuji X-T5's Classic Chrome stock recipe, tuned toward a Kodak Portra 400 aesthetic. It is deliberately clarity-forward — clarity pushed up, sharpening pulled down — because local contrast is what stops skin reading as flat plastic. Grainhaus does not claim it is a 1:1 match to a roll of Portra, and no digital filter could honestly make that claim. It is an emulation tuned to that stock's behaviour, evaluated live.
The same applies to the Kodachrome filter, a port of the X-T5's Kodachrome 64 panel: deep shadows, dense reds, high saturation, unforgiving in flat light. If you have been hunting for "Kodachrome 64 recipes", the honest answer is that the recipe logic behind that look lives on this page rather than on a page of its own — a simulation is defined by how it is evaluated, not by the name of the file it once lived in. The Kodachrome filter page covers the stock.
Recipe files versus live kernels
There is a second route to a real simulation, and if you own a Fuji camera it is the best one. The Fuji film simulation recipes are small .recipe files you load onto the camera over USB, and the camera applies them natively during capture. That is a genuine film simulation, with all the live behaviour described above. Nothing about it is a preset wearing a Fuji name.
It is also the wrong answer for most people, because the recipe has to live on the camera to work: you need the camera, a cable, a computer, and a firmware and card format that support the file. If you want the X100VI specifically, the X100VI film simulation recipes page covers that route.
Grainhaus takes the other half of the trade. The kernels live in the app, so the look is available on a phone with no extra hardware. The iOS app ships nine stocks. The browser version ships three — Normal, Kodachrome and 8mm Film — free, no account, no upload: photos never leave the device.
None of this makes the recipe file wrong. If you own an X-T5 and want Velvia on it, load Velvia on it.
When a preset is the right tool
Presets are not the losing side of this comparison. They are the right tool for a different job, and pretending otherwise would be marketing rather than an argument. Four cases where a preset wins:
- Editing a shot you already love. If the composition and the moment are right, a preset gets you a coherent look in one click.
- Matching a look across cameras. A shared preset applied at the end is a workflow, not a compromise.
- Working in a raw pipeline. Lightroom and Capture One are built around non-destructive editing. Grading there is what they are for.
- Recovering a photo taken without a look. A frame shot with no film styling can be given one afterwards. No simulation can be applied to a frame that does not exist yet.
What a preset cannot do is give you a live render, a grain that tracks the light, or a rolloff that decides at the moment of capture. If you need those, you need a simulation. If you need the four jobs above, use a preset. They are not competing tools, and a good editor uses both.
Film simulation vs Lightroom presets
For the person who edits in Lightroom, the comparison looks like this. Presets are free to download and there are an enormous number of them — thousands of packs, all slightly different, most made by someone who found a combination they liked. Film simulations are far fewer and more specific: a named set of behaviours, each tied to a known stock.
The search data points the same way. film preset is up 26%, but lightroom presets is down 10%, while fuji film simulation app carries the highest average search interest of any non-album term we measured. People are moving away from a pile of sliders and towards a camera that renders like a stock.
There is also the question of what the software has to do. A preset is a list of numbers. A simulation is a render.
FAQ
Is a film simulation better than a preset?
Not "better" — better for a particular job. A simulation wins when you want the render to happen during capture, because grain, highlight rolloff and the skin relationship are all decided while the camera still knows what the scene was. A preset wins when you are editing a frame that already exists, matching looks across bodies, or working in a raw pipeline.
Do I need a Fuji camera to use a film simulation?
No. The original route needs one: you load a .recipe file onto a Fuji body over USB and the camera applies it natively. But a simulation is defined by being evaluated live, not by which camera evaluates it. Grainhaus ships nine real film stocks as live kernels on iPhone, and the browser version ships three free, with no account and no upload.
What is the difference between a Fuji film recipe and a preset?
A recipe is applied by the camera at the moment of capture, so it behaves like film: the grain is modulated by the light, highlights roll off as they are exposed, and skin keeps its relationship to the exposure. A preset is applied after the fact, so it can only re-interpret what was already captured. They operate at different moments.
Are Lightroom presets the same thing as film simulations?
No. A Lightroom preset is a stored set of adjustments applied during editing. A film simulation is a live render at capture time. The difference shows in the grain, the highlight rolloff and how skin holds up across frames with different lighting. Presets are free and plentiful; simulations are fewer, more specific, and computed live.
Free, no subscription, no watermark. Photos never leave your device.